LED strip on reel / Work light 230V, 1500 lm/m, 25m

230V LED Strip Light - 25 meters long, powerful LED strip for demanding professional and home use, suitable for both outdoor and indoor environments

Are you looking for an LED strip light suitable for construction sites, industrial areas, and general home lighting? The 230V LED strip provides reliable and bright illumination for all environments, indoors and outdoors. This 25-meter LED strip operates directly on mains power (230V) and delivers an impressive 1500 lm/m lighting output. With a power consumption of only 12 W/m, it is also an energy-efficient choice. Thanks to its IP65 rating, it is fully waterproof and withstands varying weather conditions, making it an excellent LED strip for outdoor use.

The AGGE LED strip is suitable for lighting construction sites, scaffolding, staircases, and even mining tunnels. Its construction is highly flexible and durable, designed to endure daily use in demanding conditions. The neutral color temperature of 4000K provides pleasant light for both work and home environments. The LED strip’s CRI value of over 80 ensures lighting that closely resembles natural light, making it ideal for renovation projects and painting tasks.

Its versatile applications make the LED strip suitable for almost any need. Use it at home to illuminate yards, fences, terraces, or garages, or add extra lighting to a cottage’s shore and dock. The strip can be extended up to 100 meters (1200 W), allowing you to light large areas with a single strip.

The LED strip’s light is evenly distributed with a 120° beam angle, ensuring a wide illumination area. The package also includes a 170 cm pre-installed power cable with a plug, so the strip is ready to use immediately. If needed, you can use accessories such as splitter pieces, mounting rails, and magnetic mounts to install the strip neatly in your desired location.

Technical specifications:

- Intended use: Construction site lighting, for outdoor and indoor use
- Rated luminous flux: 1500 lm/m, total 37500 lm
- Measured luminous flux: 1250 lm/m
- Operating voltage: 230 V (direct current)
- Rated power consumption: 12 W/m, total 300 W
- Dimmable: No
- Color temperature: 4000 K (neutral white)
- Color rendering index (CRI): Ra80+
- Beam angle: 120°
- Waterproof rating: IP65 (strip and connections), IP44 (plug)
- Protection class: II
- LED strip dimensions: 16.3 mm (width) x 9 mm (height)
- Power cable length: 1700 mm
- Operating temperature range: -20°C to +45°C
- Storage temperature range: -10°C to +30°C
- Warranty: 12 months

Note: The strip can be extended up to 100 meters long.

IMPORTANT! The strip operates on 230V direct current and must always be straightened before use to prevent overheating.

The 230V LED strip is a reliable choice for both professional and home use when an efficient and durable lighting solution is needed.

Quick Guide

Connecting LED strips together

Turn the connection cap counterclockwise to remove it from the first LED strip.
Disconnect the power cable from the second LED strip set.
Connect the LED strip sets by joining the female and male connectors. Tighten the connection cap.
Repeat the previous steps for additional LED strip sets.
Attach the end cap of the strip and tighten carefully to prevent it from coming loose and to keep water out.
IMPORTANT! Ensure the power cable is not plugged into the power outlet when connecting strips. Do not exceed the manufacturer’s specified 100-meter length or maximum power of 1200 W! The strip cannot be cut. Straighten the entire strip before powering on to avoid overheating!

Starting up the LED strip

Straighten the entire strip before powering on to avoid overheating! Make sure all LED strip connections are securely tightened. Install the LED strip according to instructions using the appropriate mounting accessories, and ensure the environment is free from hazardous substances such as water, flammable gases, or fine dust. Connect the power cable to a 230V power outlet.

You can find the manufacturer’s user manual (FI/SE/NO/DK/EN) by clicking here.