Nedo dual slope laser Primus2 H2N

The Nedo Primus2 H2N is a digital dual-tilt laser for horizontal measurements.
Perfectly suited for the toughest construction sites with the highest quality requirements.
Protection class IP66 and the device is completely waterproof.
The Nedo Primus2 is made in Germany and is a true testament to German engineering.
The Nedo Primus2 H2N has a working range of over 700 meters with an accuracy of 1.5 mm/30 m.
You can set the desired tilt ±10% on two axes.
The Nedo H2N Commander2 laser receiver has a large and clear display that shows tilt, rpm, laser battery status, etc.
The receiver also functions as a remote control for the laser's functions. A special receiver that directly displays the beam level in millimeters.
The receiver is connected to the laser by radio. For example, the receiver can be used to adjust the tilt levels directly from the display.
The laser constantly monitors the set level and slope. The device immediately reports any changes to the measurement.
The set tilts are stored in the device's memory, allowing you to easily continue working where you left off, even the previous day.
A three-year warranty ensures measurements well into the future. 100 hours of operation is enough for an entire workweek.

Technical data H2N laser:
- Working area (diameter) 700 m
- Laser class 3R
- Self-leveling to the level
- Accuracy ±1.5 mm / 30 m
- Beam rotation speed 600 RPM
- Protection class IP66
- Tilt range on both axes ±10%
- Operating time approximately 100 h
- Rechargeable batteries NiMh 4.8V, 8500mAh
- Mounting thread at the bottom 5/8
- Operating temperature -20°C +50°C
- Weight 4 kg
- Dimensions 210 x 208 x 200mm
- Warranty three years

Technical data receiver COMMANDER2:
- Accuracy ranges ±0.5 mm, ± 1.0 mm, ± 2.0 mm and ± 4.0 mm
- Batteries 3 x 1.5V AA
- Reception range 70mm
- Operating temperature -20°C +50°C
- LCD display on both sides
- Protection class IP66