PREMARK roll white - 5000*50mm

Fastening to asphalt:
1. Clean the surface with a brush. The surface must be free of dirt, chemicals, oils and the like that can reduce adhesion. If the surface is damp, it must be dried with a blowtorch.
2. Remove the protective film and place PREMARK® in the desired location.
3. Heat the PREMARK® marking with a gas torch, moving the torch back and forth until the marking bubbles. Only then is it sufficiently melted. NOTE: Do not heat in spots; this can cause overheating and warping of the wax.
4. Once PREMARK® has been sufficiently heated, glass beads or friction material or combinations thereof can be sprinkled on it.
5. Road marking is complete